LiteAlign CasterCam Hub Mount is an all Stainless steel / Aluminium construction, with laser cut components.

Used to measure

• Caster
• Camber
• KPI
• Adaptable to fit 13" to 19" rims

As wheel rims differ bewteen manufacturer, the Hub Mount can be located on the rim edge, inside and outside edge or in some cases on the tyre sidewall. The hub mount is secured in place with a bungee cord.
The hands free operation is the only reliable way of measuring accurate Caster and KPI readings.

The Hub Mount will not only work with the LiteAlign CasterCam but also with all other Caster/Camber/KPI gauges on the market, thanks to a magetic surface.

Operation
Once assembled, adjustment to suit different wheel rims is done by;

• Loosen the three wing nuts.
• Sliding the three bars in either direction so the pegs sit on the wheel rim.
• Tighten the three wing nuts which clamp the three bars.
• Locate onto the wheel rim and secure inplace with a bungee cord.
• Attach your Caster/Camber/KPI gauge onto the Hub Mount utilising the magnetic surface.

Kit Contents
Part assembled kit, easy assembly with elastic bungee.

Back to top